We're sorry, but the RESET website does not work properly without JavaScript enabled. Please enable JavaScript to continue.

RESET® Air AP Process

A RESET Air AP demonstrates the ability to uphold the core intentions of the RESET Air Standards, helping to regenerate our ecological, social and economic environments via human health and make occupant health a measurable deliverable for all buildings and spaces.

RESET APs provide the support necessary to guide project teams through the RESET process and project teams pursuing RESET Pre-Accredited, Accredited, or Certified status are required to have an accredited RESET AP on the project team.

The process for becoming a RESET AP consists of fulfilling prerequisites as well as attending an in-depth training session which includes a written practical exam.

Please note that the following content outlines the process for becoming a RESET AP for the RESET Air Standard only.

1. Prerequisites

Prospective RESET APs must complete the following:

Study the RESET Air Standards

Prospective APs are expected to have read and understood the RESET Air Standards, paying close attention to the RESET Air for Commercial Interiors and RESET Air for Core & Shell sections.

Click here to view the RESET Air Standards.

Watch the RESET Air Training Modules for APs

View a series of eight, pre-recorded, training modules. These training modules are free of charge and are available for viewing anytime.

Click here to view the RESET AP - Air Training Modules.

Understand the RESET Project Statuses

Be familiar with the RESET Statuses.

A webinar was created for RESET APs and explains each status in detail.

Take the Online Knowledge Test

Pass an online knowledge test. There is no fee for the online knowledge test.

  1. Go to https://cloud.reset.build/ and create an account.
  2. Activate your account.
  3. Sign in to the RESET Cloud, then click "AP Portal" at the very top.
  4. Fill in the form with your personal information.
  5. Select the "Save and Proceed into the AP Portal" option.
  6. Click "Enter" into the RESET AP - Air Module.
  7. Follow the instructions for "Step 1 - Online Exam".

If you encounter any issues, please reach out to us at support[at]reset.build.

2. Education Intensive & Exam

An education intensive and exam session is a half-day event designed to take a deeper dive into the RESET Standards. Taught by a professional trainer, attendees will receive a comprehensive review of the technical aspects of the Standards including monitor calculation and deployment requirements.

Below is a sample itinerary of the Education Intensive & Exam:

  • 07:50 - 08:00 Log on, start time
  • 08:00 - 08:15 Roll call confirmation, Trainer Introduction
  • 08:15 - 09:15 RESET Air for Commercial Interiors (CI) Review
  • 09:15 - 10:15 CI Exam
  • 10:15 - 10:30 Break
  • 10:30 - 11:30 RESET Air for Core & Shell (CS) Review
  • 11:30 - 12:30 CS Exam
  • 12:30 - 13:00 Q+A as time allows

We post information regarding the AP Intensive & Exam sessions on our events calendar here: https://reset.build/newsroom?cate=1

3. Maintaining AP Status

Exam results and subsequent AP credentials are issued approximately two weeks after attending an education intensive and exam session.

To access all the benefits that come with AP status, including your official AP certificate and AP number, APs create a professional profile on the RESET Cloud . Once created, information can be updated and displayed publicly in the RESET AP Directory.

Once awarded, your RESET AP status is valid indefinitely.

Note that all APs are required to re-take the online exam at the request of RESET if there are amendments, edits, or changes to any of the RESET Air Standards that warrant our APs to become reacquainted with the Standard and learn new information that affects their ability to perform assessments on projects pursuing certification. APs will be notified by email of any such requirements to ensure they remain in good standing. This also is a reminder to keep your contact information current in your AP Profile in the RESET Cloud.

4. Fees

The fee for the Education Intensive & Exam is $515 USD (subject to variance depending on global region).

If the Education Intensive & Exam is online, the fee is $450 USD.

Payment will be via wire transfer. Credit card option is also available upon request with a surcharge.

The following discounts are available:

  • Discounts from Membership.
  • A 3% discount for 3-5 attendees*
  • A 6% discount for 6-8 attendees*
  • A 9% discount for 9+ attendees*

*Applicable for the same Intensive & Exam, payment from one source. The discount can be applied with the discount from Membership.

5. FAQ

Check out the RESET AP FAQ if you have any further questions.

If you are interested in becoming a RESET Accredited Professional, please reach out to us at info[at]reset.build.